Landscape Design & Construction Burleigh Waters

Lynx Landscaping

Waterfront landscaping around Burleigh Lake

Aerial view of a custom concrete pool and terraced backyard on a waterfront block, Burleigh Waters

Burleigh Waters sits west of the beach, around the lake and the canals that run off it. A lot of the backyards we see here are on the water, often terraced, with a revetment wall along the edge and not much flat ground to work with. Side access is frequently tight, and the view down to the water is usually the thing people want to keep.

It’s a suburb we know well. On an 803 sqm waterfront block here we built a custom concrete pool, curved block retaining walls and a paved alfresco, and used a 1.2 metre drop at the rear so the back of the pool could stay open, with no fence sitting in the view.

Terraces, access and the water's edge

Stepped retaining walls on a sloping waterfront block, Burleigh Waters

Levels. Many waterfront yards here fall away in terraces, leaving no flat area for a table or a pool. Getting a usable backyard usually means retaining. Walls over 1 metre need engineering and council approval. On our Burleigh Waters project, the 1.2 metre drop at the rear became an advantage: it met the pool-safety rules in a way that let us leave the back of the pool open to the water. That outcome depends on the block, and we only design it in where the levels and the standards allow.

Access. Machinery often can’t get down the side of the house. On that same job there was no clear path through, so we took out a side boundary wall to get equipment in, then built the pool and the walls. We work this out at the first visit so the method and the cost are in the quote, not a surprise later.

The canal or lake wall. The revetment wall is holding the block up. A new pool, heavy machines or tall retaining close to it all put load on the wall, and those parts of a design usually need an engineer. We look at the wall at the site visit and plan around it, rather than finding out later.

See our retaining walls and plants and gardens work.

Concrete pools on a Burleigh Waters waterfront block

We build concrete pools only, no fibreglass, so the pool is shaped to the block and the outlook. Pools start from $60,000, and the build takes 8 to 12 weeks once approvals are through. On a terraced waterfront site the dig, the retaining and the safety barrier all have to work together, which is why the engineering comes first. Approvals usually take 4 to 8 weeks, and Lynx organises them.

More on our concrete pool builds.

How a project runs

  1. Site visit and consultation ($440). Your consultation starts on site. One of our landscape architects and an estimator walk the block with you, talk through how you’d like to use your outdoor space, and look at levels, access and budget.
  2. Design. You get a to-scale 2D plan, and 3D is an optional extra. Design fees are $4,000 to $7,000, and the design takes up to six weeks, usually with one round of changes.
  3. Engineering and approvals. For pools, work near the canal or lake wall, and retaining over 1 metre, Lynx organises the engineering and council approval. Allow 4 to 8 weeks.
  4. Build. You get a program before we start, with the access method worked out first and one main contact the whole way through.

See how our landscape design and landscape construction work.

Our project in Burleigh Waters

Custom concrete pool open to the water, Dunlin project, Burleigh Waters

Dunlin, Burleigh Waters
An 803 sqm waterfront block with east-facing water views but no usable outdoor area. The backyard was heavily terraced, with no machine access. We removed a side boundary wall to get equipment through, then built a custom concrete pool, curved block retaining walls and glass fencing. A 1.2 metre drop at the rear let us leave the back of the pool open, with nothing between the water’s edge and the view. Fifteen weeks on site.

Why Burleigh Waters homeowners choose Lynx

Communication

One main contact and regular updates, so you know what's happening on site and what's coming next.

Budget certainty and fair pricing

Access, retaining, the water's-edge wall and approvals are assessed at the site visit and priced up front.

Trust and reliability

Licensed in QLD (15338177) and NSW (489729C), with a published waterfront project in this suburb you can look at.

Quality workmanship and design

Plans drawn by licensed landscape architects, with the pool, walls and paving designed as one piece of work.

Enjoyment, entertaining and relaxation

We design waterfront yards to stay open to the view: a pool to swim in, a paved place to eat, and as little fence in the way as the site allows.

Organisation and timely completion

A clear program from day one, with the access method locked in before excavation starts.

Nearby areas we work in

We also design and build in nearby Burleigh Heads, Varsity Lakes and Robina, across the Gold Coast QLD and Northern NSW.

Lynx Landscaping

Burleigh Waters FAQs

Usually, yes, if the access and the levels are worked out first. On our Burleigh Waters project the backyard had no flat area and no machine access. We took out a side boundary wall to get equipment through, then built a custom concrete pool and curved retaining walls. Concrete pools start from $60,000 and take 8 to 12 weeks to build once approvals are through.

Often, yes. The wall is holding the block up, so a new pool, heavy machines or tall retaining close to it usually need an engineer to sign off. Retaining walls over 1 metre also need engineering and council approval. We look at the wall at the first site visit, and Lynx organises the engineering and approvals. Allow 4 to 8 weeks.

Sometimes, depending on the levels of the block and the Australian Standard for pool safety. On our Burleigh Waters job, a 1.2 metre drop at the rear meant the back of the pool could stay open, with glass fencing used where the height had to be held. We only design this in where the site and the rules allow, and we sort it out with the engineer at the start.

Sign up below to receive our
FREE Sample Design